下面是我设计中最到的一些欧洲钢结构常用规范，应该来说，已经包括所有的。请同仁增减。

1.1 Reference for Structural Design
• EN 1990 –Eurocode 0: Basis of structural design
• EN 1991 – Eurocode 1: Actions on structures
• EN 1992 – Eurocode 2: Design of concrete structures
• EN 1993 – Eurocode 3: Design of steel structures
• EN 1994 – Eurocode 4: Design of composite steel and concrete structures
• EN 1995 – Eurocode 5: Design of timber structures
• EN 1996 – Eurocode 6: Design of masonry structures
• EN 1997 – Eurocode 7: Geotechnical design
• EN 1998 – Eurocode 8: Design of structures for earthquake resistance
• EN 1999 – Eurocode 9: Design of aluminium structures.
• EN 1993-1-1: Eurocode 3: Design of steel structures – Part 1-1: General rulesand rules forbuildings
• EN 1993-1-2: Eurocode 3: Design of steel structures – Part 1-2: General rules– Structural fire
design
• EN 1993-1-3: Eurocode 3: Design of steel structures – Part 1-3: General rules– Supplementaryrules for cold-formed members and sheeting
• EN 1993-1-4: Eurocode 3: Design of steel structures – Part 1-4: General rules– Supplementaryrules for stainless steels
• EN 1993-1-5: Eurocode 3: Design of steel structures – Part 1-5: Platedstructural elements
• EN 1993-1-6: Eurocode 3: Design of steel structures – Part 1-6: Strength andStability of Shell
Structures
• EN 1993-1-7: Eurocode 3: Design of steel structures – Part 1-7: Platedstructures subject to outof plane loading
• EN 1993-1-8: Eurocode 3: Design of steel structures – Part 1-8: Design ofjoints
• EN 1993-1-9: Eurocode 3: Design of steel structures – Part 1-9: Fatigue
• EN 1993-1-10: Eurocode 3: Design of steel structures – Part 1-10: Materialtoughness and
through-thickness properties
• EN 1993-1-11: Eurocode 3: Design of steel structures – Part 1-11: Design ofstructures with
tension components
• EN 1993-1-12: Eurocode 3: Design of steel structures – Part 1-12: Additionalrules for the
extension of EN 1993 up to steel grades S 700
• EN 1993-2: Eurocode 3: Design of steel structures – Part 2: Steel Bridges
• EN 1993-3-1: Eurocode 3: Design of steel structures – Part 3-1: Towers, mastsand chimneys –Towers and masts
• EN 1993-3-2: Eurocode 3: Design of steel structures – Part 3-2: Towers, mastsand chimneys –Chimneys
• EN 1993-4-1: Eurocode 3: Design of steel structures – Part 4-1: Silos
• EN 1993-4-2: Eurocode 3: Design of steel structures – Part 4-2: Tanks
• EN 1993-4-3: Eurocode 3: Design of steel structures – Part 4-3: Pipelines
• EN 1993-5: Eurocode 3: Design of steel structures – Part 5: Piling
• EN 1993-6: Eurocode 3: Design of steel structures – Part 6: Crane supportingstructures.
1.2 Standards for Materials andTechnical Delivery Conditions
EN ISO 643: Steels – Micrographic determination of the apparent grain size.
EN 10025-1: Hot rolled products of structural steels – Part 1: Generaltechnical deliveryconditions.
EN 10025-2: Hot rolled products of structural steels – Part 2: Technicaldelivery conditions fornon-alloy structural steels.
EN 10025-3: Hot rolled products of structural steels – Part 3: Technicaldelivery conditions fornormalized/normalized rolled weldable fine grainstructural steels.
EN 10025-4: Hot rolled products of structural steels – Part 4: Technicaldelivery conditions forthermomechanical rolled weldable fine grain structuralsteels.
EN 10025-5: Hot rolled products of structural steels – Part 5: Technicaldelivery conditions forstructural steels with improved atmospheric corrosionresistance.
EN 10025-6: Hot rolled products of structural steels – Part 6: Technicaldelivery conditions for flatproducts of high yield strength structural steelsin the quenched and tempered condition.
EN 10027-1: Designation systems for steels – Part 1: Steel names.
EN 10027-2: Designation systems for steels – Part 2: Numerical system.
EN 10149-1: Hot-rolled flat products made of high yield strength steels forcold forming – Part 1:
General delivery conditions.
EN 10149-2: Hot-rolled flat products made of high yield strength steels forcold forming – Part 2:
Delivery conditions for thermomechanically rolled steels.
EN 10149-3: Hot-rolled flat products made of high yield strength steels forcold forming – Part 3:
Delivery conditions for normalized or normalized rolled steels.
EN 10162: Cold rolled steel sections – Technical delivery conditions –Dimensional and crosssectional tolerances.
EN 10164: Steel products with improved deformation properties perpendicular tothe surface of
the product – Technical delivery conditions.
EN 10268: Cold rolled steel flat products with high yield strength for coldforming – Technical
delivery conditions.
• Hollow sections
EN 10210-1: Hot finished structural hollow sections of non-alloy and fine grainsteels – Part 1:
Technical delivery conditions.
EN 10219-1: Cold formed welded structural hollow sections of non-alloy and finegrain steels –
Part 1: Technical delivery conditions.
• Strip and flat products
EN 10346: Continuously hot-dip coated steel flat products – Technical deliveryconditions.
EN 10268: Cold rolled steel flat products with high yield strength for coldforming – Technical
delivery conditions.
1.3 Products and Tolerances
EN 1090-1: Execution of steel structures and aluminium structures – Part 1:Requirements for
conformity assessment of structural components.
EN 1090-2: Execution of steel structures and aluminium structures – Part 2:Technical requirements for steel structures.
EN 10204: Metallic products – Types of inspection documents.
EN 10024: Hot rolled taper flange I sections – Tolerances on shape anddimensions.
EN 10034: Structural steel I and H sections – Tolerances on shape anddimensions.
EN 10055: Hot rolled steel equal flange tees with radiused root and toes –Dimensions and tolerances on shape and dimensions.
EN 10056-1: Structural steel equal and unequal leg angles – Part 1: Dimensions.
EN 10056-2: Structural steel equal and unequal leg angles – Part 2: Toleranceson shape and
dimensions.
EN 10058: Hot rolled flat steel bars for general purposes – Dimensions andtolerances on shapeand dimensions.
EN 10059: Hot rolled square steel bars for general purposes – Dimensions andtolerances on shapeand dimensions.
EN 10060: Hot rolled round steel bars for general purposes – Dimensions andtolerances on shapeand dimensions.
EN 10061: Hot rolled hexagon steel bars for general purposes – Dimensions andtolerances on
shape and dimensions.
EN 10279: Hot rolled steel channels – Tolerances on shape, dimensions and mass.
• Hollow sections
EN 10219-2: Cold formed welded structural hollow sections of non-alloy andfine grain steels –Part 2: Tolerances, dimensions and sectional properties.
EN 10210-2: Hot finished structural hollow sections of non-alloy and fine grainsteels – Part 2:
Tolerances, dimensions and sectional properties.
EN 10278:2002: Dimensions and tolerances of bright steel products.
• Flat products
EN 10278: Dimensions and tolerances of bright steel products.
EN 508-1: Roofing products from metal sheet – Specification for self-supportingproducts ofsteel, aluminium or stainless steel sheet – Part 1: Steel
EN 10143: Continuously hot-dip coated steel sheet and strip – Tolerances ondimensionsand shape.
EN 14782: Self-supporting metal sheet for roofing, external cladding andinternal lining– Product specification and requirements.
EN 14509: Self-supporting double skin metal faced insulating panels– Factorymade products–
Specifications.
1.4 Material Tests
EN ISO 9015-1: Destructive tests on welds in metallic materials – Hardnesstesting – Part 1: Hardness test on arc welded joints.
EN ISO 6892-1: Metallic materials – Tensile testing – Part 1: Method of test atroom temperature.
EN ISO 7500-1: Metallic materials – Verification of static uniaxial testingmachines – Part 1:Tension/compression testing machines – Verification and calibrationof the force-measuringsystem.
EN ISO 376: Metallic materials – Calibration of force-proving instruments usedfor the verification of uniaxial testing machines.
EN ISO 9513: Metallic materials – Calibration of extensometers used in uniaxialtesting.
EN ISO 148-1: Metallic materials – Charpy pendulum impact test – Part 1: Testmethod.
EN ISO 148-2: Metallic materials – Charpy pendulum impact test – Part 2: Verificationof testing
machines.
EN ISO 148-3: Metallic materials – Charpy pendulum impact test – Part 3:Preparation and characterization of Charpy V-notch test pieces for indirectverification of pendulum impact
machines.
UNI EN ISO 18265: EN ISO 18265: Metallic materials — Conversion of hardnessvalues.
1.5 Mechanical Fasteners
EN ISO 898-1: Mechanical properties of fasteners made of carbon steel andalloy steel –Part 1: Bolts, screws and studs with specified property classes – Coarsethread and fine pitchthread.
EN ISO 898-5: Mechanical properties of fasteners made of carbon steel and alloysteel – Part 5: Setscrews and similar threaded fasteners not under tensilestresses.
EN ISO 898-6: Mechanical properties of fasteners – Part 6: Nuts with specifiedproof load values –Fine pitch thread.
EN ISO 1478: Tapping screws thread.
EN ISO 1479: Hexagon head tapping screws.
EN ISO 2702: Heat-treated steel tapping screws – Mechanical properties.
EN ISO 4014: Hexagon head bolts – Product grades A and B.
EN ISO 4016: Hexagon head bolts – Product grade C
EN ISO 4017: Hexagon head screws – Product grades A and B.
EN ISO 4018: Hexagon head screws – Product grade C.
EN ISO 7049: Cross-recessed pan head tapping screws.
EN ISO 7089: Plain washers – Normal series – Product grade A.
EN ISO 7090: Plain washers, chamfered – Normal series – Product grade A.
EN ISO 7091: Plain washers – Normal series – Product grade C.
EN ISO 10684: Fasteners – Hot dip galvanized coatings.
EN 14399-1: High-strength structural bolting assemblies for preloading – Part1: Generalrequirements.
EN 14399-2: High-strength structural bolting assemblies for preloading – Part2: Suitability testfor preloading.
EN 14399-3: High-strength structural bolting assemblies for preloading – Part3: System HR –Hexagon bolt and nut assemblies.
EN 14399-4: High-strength structural bolting assemblies for preloading – Part4: System HV –Hexagon bolt and nut assemblies
EN 14399-5: High-strength structural bolting assemblies for preloading – Part5: Plain washers
EN 14399-6: High-strength structural bolting assemblies for preloading – Part6: Plain chamferedwashers.
EN 15048-1: Non-preloaded structural bolting assemblies – Part 1: Generalrequirements.
EN 15048-2: Non-preloaded structural bolting assemblies – Part 2: Suitabilitytest.
EN 20898-2: Mechanical properties of fasteners – Part 2: Nuts with specifiedproof load values –Coarse thread.
1.6 Welding
1.6.1 Welding Processes
EN 1011-1: Welding – Recommendations for welding of metallic materials –Part 1: General guidance for arc welding.
EN 1011-2: Welding – Recommendations for welding of metallic materials – Part2: Arc weldingof ferritic steels.
EN 1011-3: Welding – Recommendations for welding of metallic materials – Part3: Arc weldingof stainless steels.
EN ISO 4063: Welding and allied processes – Nomenclature of processes andreference numbers.
EN ISO 9692-1: Welding and allied processes – Recommendations for jointpreparation – Part 1:Manual metal-arc welding, gas-shielded metal-arc welding,gas welding, TIG welding and beamwelding of steels.
1.6.2 Welding Consumables
EN ISO 14171: Welding consumables – Solid wire electrodes, tubular coredelectrodes andelectrode/flux combinations for submerged arc welding ofnon-alloy and fine grain steels –Classification.
1.7 Protection
EN ISO 12944-1: Paints and varnishes – Corrosion protection of steel structuresby protectivepaint systems – Part 1: General introduction.
EN ISO 12944-2: Paints and varnishes – Corrosion protection of steel structuresby protectivepaint systems – Part 2: Classification of environments.
EN ISO 12944-3: Paints and varnishes – Corrosion protection of steel structuresby protective
paint systems – Part 3: Design considerations.
EN ISO 12944-4: Paints and varnishes – Corrosion protection of steel structuresbyprotective paint systems – Part 4: Types of surface and surface preparation.
EN ISO 12944-5: Paints and varnishes – Corrosion protection of steel structuresby protectivepaint systems – Part 5: Protective paint systems.
EN ISO 12944-6: Paints and varnishes – Corrosion protection of steel structuresbyprotective paint systems – Part 6: Laboratory performance test methods.
EN ISO 12944-7: Paints and varnishes – Corrosion protection of steel structuresby protectivepaint systems – Part 7: Execution and supervision of paint work.
EN ISO 12944-8: Paints and varnishes – Corrosion protection of steel structuresby protectivepaint systems – Part 8: Development of specifications for new workand maintenance.
EN ISO 8501-1: Preparation of steel substrates before application of paints andrelatedproducts – Visual assessment of surface cleanliness – Part 1: Rustgrades and preparationgrades of uncoated steel substrates and of steel substratesafter overall removal of previouscoatings
EN ISO 8501-2: Preparation of steel substrates before application of paints andrelated products –Visual assessment of surface cleanliness – Part 2:Preparation grades of previously coated steelsubstrates after localized removalof previous coatings.
EN ISO 8501-3: Preparation of steel substrates before application of paints andrelated products –Visual assessment of surface cleanliness – Part 3:Preparation grades of welds, edges and otherareas with surface imperfections.
EN ISO 8501-4: Preparation of steel substrates before application of paints andrelated products –Visual assessment of surface cleanliness – Part 4: Initialsurface conditions, preparation gradesand flash rust grades in connection withhigh-pressure water jetting.
EN ISO 8503-1: Preparation of steel substrates before application of paints andrelated products –Surface roughness characteristics of blast-cleaned steelsubstrates – Part 1: Specifications anddefinitions for ISO surface profile comparatorsfor the assessment of abrasive blast-cleanedsurfaces.
EN ISO 8503-2: Preparation of steel substrates before application of paints andrelated products –Surface roughness characteristics of blast-cleaned steelsubstrates – Part 2: Method for thegrading of surface profile of abrasiveblast-cleaned steel – Comparator procedure.
EN ISO 8503-3: Preparation of steel substrates before application of paints andrelated products– Surface roughness characteristics of blast-cleaned steelsubstrates – Part 3: Method for thecalibration of ISO surface profilecomparators and for the determination of surface profile –Focusing microscopeprocedure.
EN ISO 8503-4: Preparation of steel substrates before application of paints andrelated products– Surface roughness characteristics of blast-cleaned steelsubstrates – Part 4: Method forthe calibration of ISO surface profilecomparators and for the determination of surfaceprofile – Stylus instrumentprocedure.
EN ISO 8503-5: Preparation of steel substrates before application of paints andrelated products –Surface roughness characteristics of blast-cleaned steelsubstrates – Part 5: Replica tape methodfor the determination of the surfaceprofile.
EN ISO 1461 : Hot dip galvanized coatings on fabricated iron and steel articles– Specificationsand test methods.
EN ISO 14713-1: Zinc coatings – Guidelines and recommendations for theprotection againstcorrosion of iron and steel in structures – Part 1: Generalprinciples of design and corrosionresistance.
EN ISO 14713-2: Zinc coatings – Guidelines and recommendations for theprotection againstcorrosion of iron and steel in structures – Part 2: Hot dipgalvanizing.

有加的，有减的，同全仁，联系我。

微信：gyq13701330651

QQ：641887955